Brother TN630 is one of the best Brother printers. Its wireless connectivity allows you to print wirelessly from any spot in your house. For using the wireless feature you need to do the Brother TN630 wifi setup. The setup process does not take long, you are just a few steps away from the setup. Read on the blog ahead to see the steps for brother TN630 wifi setup.
Also, the most important point before giving printing commands wirelessly is to download the printer driver software that is compatible with your printer model. You can get your printer’s driver software from the manufacturer’s official website. Once it is downloaded you are all set to do the wifi setup so that you can give printing commands wirelessly from anywhere.
Step-By-Step Guide To Do The Brother TN630 Wifi Setup:-
Before starting the wifi setup for the Brother TN630 printer setup make sure you not down your wireless network’s name i.e. SSID and network key. Once that’s done let’s start with the setup process:
- Firstly, enable the power supply to the Brother printer by attaching the power cord to the electrical supply socket.
- Then, switch on the Brother TN630 printer.
- Press the up and down arrow buttons to select the network option and tap on the OK button to connect.
- Now, again press the up and down arrow buttons to look for the WLAN option and hit the OK button once again to select the OK button to confirm it.
- Then, using the up and down arrow buttons select the ‘Setup Wizard’ tab and tap on the OK button to proceed.
- If you see a prompt asking, ‘WLAN Enable?’ then, select Ok to allow the wifi network. The Wireless Network Wizard will initiate.
- After that, your PC device will start finding the available networks and show the SSIDs on your screen. To choose your network’s SSID, use the up and down arrow buttons and click on your network name to select it.
- From the options given below, select one:
- To use the ‘Authentication and Encryption’ method, type in your network key and hit the OK button. You need your network key for that. To apply the settings, choose the YES option.
- In case you have not selected encryption mode for the Authentication method ‘Open System’ then, hop onto the next step.
- Then, your Brother TN630 printer will try establishing a connection with the wireless network.
Brother TN630 Connected To Wifi!
Once you have attempted the above steps you are done with the Brother TN630 wifi setup. Once the wifi setup is completed, it becomes easy for you to give printing commands from anywhere in your home. You can also give printing commands to the printer from your phone. Just make sure that your devices are connected to the same wifi network and the connection is active and stable. The power supply should be consistent while the wifi setup is happening. Any fluctuations in the power supply can hinder the wifi setup process. Just that needs to be taken care of and then you can enjoy printing wirelessly.
Printer Customer Service 